Ls123 UV Tester Solar Film Car Window Tint Checker UV Radiation Protective Tester UV Power Meter

• Customization: Available
• After-sales Service: 24 Hours Free Online Technical Support
• Warranty: 12 Months Warranty
• Model NO.: LS123
• Display: Digital
• Product Name: Ls123 UV Power Meter
• Power Range: 0-40000 W/M*M
• Measurement Accuracy: +- 10%
• Infrared Rejection Rate: -999%-100%
• Spectral Response: 260nm-380nm, Peak Wavelength=365nm
• Photosensitive Aperture: 10mm
• Working Temperature: -20ºC - + 70 ºC
• Power Supply: AAA Alkaline Dry Batteries
• Transport Package: Carton Box
• Specification: 21*13*8cm
• Trademark: TANJN
• Origin: China
• HS Code: 9030849000
• Production Capacity: 10000PCS/Month
• Package Size: 21.00cm * 13.00cm * 8.00cm
• Package Gross Weight: 0.600kg

Product Description

Product Parameters

LS123 UV Tester Solar Film Car Window Tint Checker UV Radiation Protective Tester UV Power Meter

Descriptions:

LS123 UV power meter is mainly used for the measurement of UV blocking rate of materials, applicable to explosion-proof film, solar film, heat-insulating glass and other materials. The UV power meter can also be used to measure the power density of UV radiation energy in various light sources. The window tint tester detector is located at the top of the instrument for quick and easy use. Wide spectral response to test UV intensity from 260nm-380nm wavelengths.

 

Features:

1. The window tint tester is suitable for testing the UV-blocking performance of explosion-proof film, automobile heat-insulating film, solar film, heat-insulating glass and other materials.
2. Mainly used for UV radiation intensity measurement.
3. UV rejection rate can be automatically converted and displayed directly on the screen.
4. Wide spectral response to test UV intensity from 260nm-380nm wavelengths.

Specification

Parameter	Value
Power range	0-40000 μW / cm²
Measurement accuracy	± 10%
Ultraviolet rejection rate	-999%-100%
Spectral response	260nm-380nm, λp=365nm
Photosensitive aperture	10mm
Dimension	125mm * 69mm * 24.5mm (L*W*H)
Weight	about 140 g (including battery)
Working temperature	-20 ° C ~ + 70 ° C
Power supply	AAA alkaline dry batteries

 

Product Description

Packing list 

No.	Description	Quantity	Unit
1	LS123 UV Power Meter	1	Set
2	User Manual	1	Pcs
3	Certificate / warranty card	1	Pcs
4	Packing box dimension 21*13*6 cm(L*W*H)	1	Pcs

Applicable for a wide range of materials

The solar film tester is suitable for testing the UV-blocking performance of explosion-proof film, automobile heat-insulating film, solar film, heat-insulating
glass and other materials.

UV radiation intensity measurement

The solar film tester can be used to measure ultraviolet radiation intensity of ultraviolet light sources.

 

Company Profile

Packaging & Shipping

FAQ

1. What is the difference between a metal film and an endothermic film?
The metal film is produced by a magnetron sputtering process. A large amount of metal elements are added and the has a good reflection ability to the infrared film. It is insulated by the principle of reflecting infrared rays. The absorption film is added with an infrared absorber during production and the infrared is absorbed by the film. It is insulated by the bsorption principle and secondary heat radiation will be generated after the heat absorption is saturated.
    
2. Why are 1400nm instruments so much more expensive than 940nm instruments?
It's all about the cost of raw materials. The cost of a 1400nm light source and receiver is much higher.
    
3. Can the window film transmission meter measure the insulation rate?
Our instrument measures the infrared rejection rate. The higher the infrared rejection rate, the higher the thermal insulation rate. Because visible light also has a small amount of heat, in the strict sense, the heat insulation rate needs to integrate visible light, infrared and ultraviolet heat insulation data. Ultraviolet heat is very small and visible light is beneficial. Therefore, infrared is the main source of heat, so the infrared rejection rate is basically equivalent to the thermal insulation rate.
    

4. Why are 1400nm instruments so much more expensive than 940nm instruments?
It's all about the cost of raw materials. The cost of a 1400nm light source and receiver is much higher.
    
5. What is the difference between the new and old LS101?
The parameters of the new and old models are basically the same, both of which can measure three parameters of heat insulation, UV rejection and light transmission.
The old model can only be used when plugged in. It is a digital tube display. The new model is an LCD display. It uses 4 AA
batteries and has a USB interface on the instrument. It can be directly powered by a power bank or 5V charging head.
The light source of the old LS101 is a point light source, which is only suitable for films and thin glass; the new LS101 uses
a parallel light path design and thick glass can also be tested.
 
6. Do you offer OEM and ODM service? 
Yes. We can supply OEM and make customized design for any specific application. 
 
 
7. How can we guarantee quality? 
Always a pre-production sample before mass production; Always final Inspection before shipment;